The 26" Greystone Electric Fireplace with Remote Control # 324-000065 does force the air out utilizing a blower fan. It works like a space heater with the different temperature settings, a timer, and automatic setting as well. I've attached a picture of the blower fan for reference. The blower fan doesn't have different settings like low, med, high on any of the units. It is temperature regulated.
I've linked the page to all your options and they will all have the blower fan similar... view full answer...
For your 2012 Land Rover LR2 the Draw Tite hitch part # 75688 would be my recommendation as it fits your vehicle, does not require drilling and because it comes with a bracket for trailer wiring already welded to it.
For trailer wiring you'd then want the part # C59236 which is confirmed as a fit. Then for a bracket to bolt to the hitch wiring bracket you'd want the part # 18144.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with... view full answer...
For a great fit for your 2012 Land Rover LR2, I recommend the Draw-Tite Class III Max Frame Round Tube Receiver Hitch, Item # 75688. It does not require drilling and bolts onto your frame. For trailer wiring, I recommend the Kit, Item # C59496, which is confirmed as a fit. If you need a bracket for the hitch wiring, I recommend Item # 18144.
If you need a hitch ball mount and hitch balls for towing a trailer, I recommend the Etrailer ball mount kit, Item # 989900. It includes 2 ball... view full answer...
I spoke with my contact at Canine Covers and while the exact dimensions of the Canine Covers # DCL6343CH aren't available he was able to tell me that the # DCL6343CH is custom design for the 2008-13 Land Rover LR2 - it will work with the - (2nd row up or down and w/ extension to 1st row seat back) (So, it will cover the back of the front seats- that front seatback section is w/o padding since it is just for protection- not sitting/laying on).
The top of the cover is Polycotton and it... view full answer...
The Curt Trailer Hitch Receiver, part # C13052 is a verified as a good fit for your 2008 Land Rover.
This is a Class lll hitch and it has a 2 inch receiver opening.
The Euro ball mounts we offer are not designed for a 2 inch receiver. They fit 1-1/4 inch receiver openings.
You might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball,... view full answer...
To install a 7-way on your 2008 Land Rover LR2 you would need to start with a 4-way. That will provide the turn signal functions and then you can use a 7-way adapter to convert it to the style of connector you need.
For the 4-way you would want to start with the part # C59236 which is a universal wiring harness that's been tested as a fit for your vehicle.
Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.
If... view full answer...
Since you already have a 4-Way trailer connector on your 2008 Land Rover LR2, you will need installation kit # ETBC7 and a brake controller. You may not have to do any splicing. On the ETBC7, the 4-Way you have plugs into the mating 4-Way on the ETBC7 adapter.
The white wire grounds to the vehicle frame. The purple wire is for reverse lights and would be the only rear wire that would potentially have to be spliced into the vehicle wiring. But if the trailer does not have reverse lights... view full answer...
I do have an option for you, but there is not an adapter for a 4-way connector to fix the issue you are having with the LED light strip on your 2008 Land Rover LR2.
Instead you will need to install a Load Resistor in each of the 3 circuits in the light strip using the # DI34ZR. This will correct the flashing issue you are having.
I included a video of the # DI34ZR for you to take a look at. view full answer...
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. These aren't specific to your vehicle but they will show you the same process that will be applied to your 2015 Land Rover LR2.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885.... view full answer...
Go To Results